Slab Leak Water Damage Restoration in Homestead: Dry Floors, Fixed Pipes
Thermal detection, direct extraction, and structural drying for under-slab water damage
Slab Leak Water Damage Restoration in Homestead starts with finding the leak before the damage spreads. We use thermal imaging cameras and moisture meters to trace hidden water under your floor, then extract, dry, and restore the affected materials. If you have warm spots on the floor or a water bill that jumped, call us at (645) 654-0721.
What Slab Leak Water Damage Restoration in Homestead Involves
Slab Leak Water Damage Restoration in Homestead is the process of locating water escaping from a pressurized pipe beneath your foundation, stopping it, and drying the structure before mold or structural damage sets in. Water travels along the path of least resistance under a slab, so the wet spot you see on the floor is rarely where the pipe failed. We use a thermal imaging camera and a moisture meter to map the actual spread, then a boroscope camera to confirm the break. From there, a water extraction unit pulls standing water, and air movers and a dehumidifier dry the subfloor, baseboards, and drywall. Most jobs take two to four days of drying, with daily readings logged on a hygrometer.
Homestead homes sit on some of the most aggressive soil in Miami-Dade County, and the combination of shifting ground and copper piping that has been in service for decades makes under-slab leaks common. If you have noticed a hot spot on the tile, the sound of running water when nothing is on, or a jump of more than 2,000 gallons on your water bill, that is usually a slab leak. Our emergency slab leak cleanup Homestead crews work 24/7, including after-hours calls from the Krome Avenue Corridor and Redland, because the longer water sits under a slab, the more flooring, drywall, and insulation it ruins.
Why Homestead Homeowners Call Us for Slab Leak Water Damage
Under-slab water does not dry on its own. It wicks into baseboards, insulation, and subfloor, and mold can start within 24 to 48 hours. Here is what you get when you call us instead of waiting.
Leak Found Without Guesswork
We do not jackhammer first and ask questions later. A thermal imaging camera and infrared thermometer narrow the search to a few square feet, and a boroscope camera confirms the break. That means less concrete removed, a smaller repair footprint, and a faster return to normal. Most detections take 60 to 90 minutes.
Drying That Passes Inspection
We set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers, then log moisture readings daily. We do not pull equipment until the subfloor and drywall hit dry standard. That documentation is what your insurance adjuster needs, and it is why our drying passes the first time.
Mold Stopped Before It Starts
Standing water and hidden moisture in Homestead's humidity can grow mold in under two days. We treat affected framing with an antimicrobial and, when needed, run a HEPA vacuum and ozone generator. If mold already took hold, our IICRC AMRT technicians handle remediation under a Florida Mold-Related Services License.
Insurance Paperwork Handled
Slab leak claims get denied when the cause and the damage are not documented clearly. We photograph the leak point, map the moisture spread, and build the estimate in Xactimate, the same platform most carriers use. That keeps your claim moving and reduces back-and-forth with the adjuster.
Our Slab Leak Water Damage Restoration Process
Every job follows the same five steps, from the first phone call to the final moisture reading. You will know what is happening and what it costs before we start.
Call and Triage
You call (645) 654-0721 and describe what you are seeing: a warm floor spot, a spike in the water bill, or water wicking up through the tile. We ask a few questions to confirm it sounds like a slab leak, then dispatch a crew. For active water, we treat it as emergency slab leak cleanup Homestead and roll immediately.
Detection and Mapping
On site, we walk the affected area with a thermal imaging camera and an infrared thermometer to find temperature anomalies, then confirm with a moisture meter and boroscope camera. We map the wet zone on a floor plan and show you exactly where the water has traveled. This step takes 60 to 90 minutes.
Water Removal and Drying
We pull standing water with a water extraction unit, then set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers. Baseboards and wet drywall come out where they are holding moisture. We log readings on a hygrometer every day and adjust the equipment layout until the structure hits dry standard.
Repair and Restoration
Once the slab and framing are dry, we repair or replace damaged materials: subfloor, hardwood flooring, drywall, insulation, and baseboards. If the pipe itself needs repair, we coordinate with a licensed plumber so the fix and the restoration happen in the right order. Most restorations finish within one to three days after drying.
Final Verification
Before we leave, we re-check every affected area with a moisture meter and give you a written drying report with daily readings, photos, and the Xactimate estimate. You get a clear record for your insurance claim and a baseline for any future monitoring.
Local Experience With Under-Slab Water Damage
Our technicians hold IICRC WRT, IICRC ASD, and IICRC AMRT certifications, and we work under a Florida DBPR Licensed Contractor and Florida Mold-Related Services License. We have dried homes across Miami-Dade County, from 1950s block houses near Homestead Historic Downtown to newer construction in Waterstone and Marbella. Slab leaks behave differently in each: older copper piping fails at joints, while newer PVC piping can crack at fittings under shifting soil. We have seen enough of both to know where to look first, and we document every job the same way so your insurance claim stands up.
- IICRC WRT and ASD certified in water damage restoration and structural drying
- IICRC AMRT certified for mold remediation when hidden moisture has already spread
- EPA Lead-Safe Certified for work in pre-1978 Homestead homes
- Xactimate Certified estimating for insurance-ready documentation
- OSHA 10 trained crews for safe demolition and equipment setup
Why Homestead Trusts Our Slab Leak Water Damage Restoration
We are a local crew, not a call center. When you call, you talk to someone who knows Homestead streets, Homestead soil, and Homestead insurance carriers. Here is what that means for your job.
24/7 Emergency Response
Slab leaks do not wait for business hours. We answer calls at 2 a.m. and dispatch from Homestead, so we are on site fast. For active water, every hour you wait adds drying time and raises the chance of mold. Our 24/7 slab leak repair in Homestead, Florida line is (645) 654-0721.
Detection Before Demolition
We use a thermal imaging camera, moisture meter, and boroscope camera to pinpoint the leak before we open the slab. That keeps the repair small and the restoration bill lower. Most detections take 60 to 90 minutes, and we show you the readings on screen.
Insurance-Ready Documentation
We photograph the leak, map the moisture spread, and build the estimate in Xactimate. That is the format most carriers accept, which means fewer delays and fewer denied line items. If you need affordable slab leak repair Homestead without cutting corners on drying, this is how we keep the scope honest.
Drying You Can Verify
We log moisture readings daily on a hygrometer and do not pull equipment until the structure hits dry standard. You get the readings in writing. If you have been searching for slab leak water damage restoration near me Homestead FL and want proof the job is done, that report is it.
What Our Slab Leak Water Damage Restoration Includes
Every slab leak job starts with detection and ends with a dry, restored structure. Here is what is included in a standard scope. If the pipe itself needs repair, we coordinate with a licensed plumber and keep the restoration on schedule.
What's Included
Thermal Leak Detection
We use a thermal imaging camera, infrared thermometer, moisture meter, and boroscope camera to find the leak and map the wet zone. You see the readings on screen before we open anything. Most detections take 60 to 90 minutes.
Water Extraction and Drying
Standing water comes out with a water extraction unit. Then we set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers and log daily hygrometer readings until the structure hits dry standard.
Damaged Material Removal
Saturated baseboards, drywall, insulation, and subfloor sections come out so the framing can dry. We replace them with mold-resistant drywall and matching materials during restoration.
Mold Prevention Treatment
We treat affected framing with an antimicrobial and, when needed, run a HEPA vacuum and ozone generator. If mold already took hold, our IICRC AMRT technicians handle remediation under a Florida Mold-Related Services License.
Insurance Documentation
We photograph the leak point, log moisture readings daily, and build the estimate in Xactimate. That package goes to your adjuster so the claim moves without repeated site visits.
Final Drying Verification
Before we leave, we re-check every affected area with a moisture meter and give you a written drying report. You get a clear record for your claim and a baseline for future monitoring.
Slab Leak Problems We Solve for Homestead Homes
Under-slab water does not stay put. It follows the slab, wicks into walls, and keeps humidity high long after the visible puddle is gone. These are the problems we see most often in Homestead.
Warm spots on tile or vinyl flooring
A hot spot usually means hot water is escaping under the slab. Left alone, it warps flooring, loosens adhesive, and can crack tile within weeks.
We confirm the leak with a thermal imaging camera and infrared thermometer, extract any standing water, and dry the subfloor. Once the pipe is repaired, we replace the affected flooring so the surface is level and stable again.
Water bill jumped by thousands of gallons
A slab leak can waste 2,000 to 10,000 gallons a month. Beyond the bill, that water is saturating the soil and the slab, which raises the risk of foundation movement.
We trace the leak, stop the water source with a licensed plumber, and dry the structure. We also document the loss in Xactimate so your insurance claim reflects the actual damage, not just the visible puddle.
Musty smell and mold growth near baseboards
Mold can start within 24 to 48 hours of a slab leak. Once it is in the drywall and insulation, it spreads every time the AC runs and can affect indoor air quality.
Our IICRC AMRT technicians remove affected materials, HEPA vacuum the area, and treat with an antimicrobial. We also run a dehumidifier to bring humidity down to a level where mold cannot regrow.
Buckling hardwood and soft subfloor
Hardwood cups and buckles when the subfloor stays wet. If the moisture is not stopped, the boards and the subfloor both have to be replaced, which is a much bigger job.
We dry from below when possible, then sand and refinish boards that can be saved. Where the subfloor is too far gone, we replace it and install new flooring that matches the rest of the room.
When Homestead Homeowners Call Us for Slab Leaks
A homeowner in Redland notices a warm patch on the kitchen tile and a water bill that doubled in one month.
We run thermal detection, confirm the leak with a boroscope camera, and extract any standing water. Then we set air movers and a dehumidifier, log daily readings, and coordinate with a plumber for the pipe repair.
The leak is fixed, the subfloor is dry in three days, and the homeowner has a documented claim for the flooring replacement.
A property manager in Waterstone finds water wicking up through vinyl plank in a rental unit after a tenant reports a musty smell.
We inspect with a moisture meter and thermal camera, remove the saturated plank and baseboards, and dry the slab and framing. We also check adjacent units for hidden moisture.
The unit is dry and mold-free in four days, and the owner has an Xactimate estimate that matches the carrier's approved scope.
A homeowner near Homestead Historic Downtown hears running water when nothing is on and finds the water heater is fine.
We rule out appliance leaks first, then move to under-slab detection. A thermal camera shows the leak path, and we extract and dry before the plumber opens the slab.
The pipe is repaired with a small opening, the flooring is restored, and the homeowner avoids a full slab replacement.
A business on the Krome Avenue Corridor has a slab leak that is threatening to close the store during a busy week.
We work after hours, extract and dry overnight, and document the loss for the commercial carrier. We keep the sales floor usable by containing the work area.
The store stays open, the drying finishes in three days, and the claim is filed with full photo and moisture documentation.
Tools and Methods We Use for Slab Leak Restoration
Tools & Equipment
Thermal imaging camera
Finds temperature differences under flooring to narrow the leak location before any concrete is opened. Most detections take 60 to 90 minutes.
Moisture meter and hygrometer
Measures moisture content in subfloor, drywall, and framing, and tracks humidity in the drying chamber. We log readings daily until dry standard is reached.
Boroscope camera
Confirms the leak point inside the slab or wall cavity without unnecessary demolition. It gives us a visual record for your insurance file.
Water extraction unit
Pulls standing water from tile, hardwood, and carpet before drying equipment goes in. Truck-mount and portable units cover most Homestead homes.
Dri-Eaz and Phoenix Restoration Equipment air movers
Create high-velocity airflow across wet surfaces to speed evaporation. We position them based on the moisture map, not a fixed pattern.
Dehumidifier
Removes moisture from the air so the drying chamber keeps pulling water out of materials. We run Honeywell and Frigidaire units for smaller rooms.
HEPA vacuum and ozone generator
Used when mold is present or suspected. The HEPA vacuum captures spores, and the ozone generator treats odors after the area is cleaned.
Methods
IICRC S500 drying standard
We follow the IICRC S500 standard for water damage restoration, which sets the drying goals and the documentation requirements. That is why our readings and reports hold up with insurance adjusters.
Thermal mapping before demolition
We map the wet zone with a thermal camera and moisture meter before opening any slab. This keeps the repair small and the restoration scope accurate, which matters when the claim is reviewed.
Daily moisture logging
We record hygrometer and moisture meter readings every day and adjust equipment placement based on the numbers. Drying is not finished until the structure hits dry standard, not when the floor looks dry.
Xactimate estimating
We build the repair estimate in Xactimate, the platform most Florida carriers use. That means fewer line-item disputes and a faster claim decision for Homestead homeowners.
How Slab Leak Restoration Runs in Homestead
Homestead sits on limestone and sandy soil that shifts with the wet and dry seasons, and that movement is hard on under-slab piping. Copper lines in older homes near Homestead Historic Downtown tend to fail at joints, while PVC lines in newer construction can crack at fittings. Add Miami-Dade County's high water table during the summer rainy season, and a small leak can turn into a large moisture problem fast. We plan every slab leak repair in Homestead, Florida job around that reality: detection first, extraction and drying second, and material replacement last. If you are searching for same-day slab leak water damage restoration Homestead FL, we dispatch from Homestead and can usually be on site within the hour. We also know the local permitting and inspection process, so restoration work is done to code and documented for your carrier.
Service Areas
Older block homes with original copper piping. Failures usually happen at joints, and we often find water has traveled along the slab into adjacent rooms.
Newer construction with PVC supply lines. Leaks here tend to be at fittings, and the tile flooring makes thermal detection fast and accurate.
Larger lots on sandy soil. The water table moves more here, so we check the slab edge and exterior grading as part of the inspection.
Two-story homes where a slab leak can wick into the first-floor walls. We check baseboards and drywall on the ground floor during detection.
Mixed residential and commercial. We schedule after-hours work for businesses so the drying equipment does not interrupt operations.
Local Considerations
High water table during summer rains
Water has nowhere to drain, so a slab leak can saturate the soil and push moisture up through the slab faster. Drying takes longer, and we often add extra dehumidifiers.
Limestone and sandy soil movement
Seasonal soil movement stresses under-slab piping. It is why we see more joint failures in older copper lines and fitting cracks in newer PVC.
Year-round humidity above 70 percent
Ambient humidity slows evaporation and raises mold risk. We run dehumidifiers continuously and log readings daily to confirm the structure is drying.
Older housing stock with original piping
Homes built before 1980 often have copper lines that are near the end of their service life. We check for multiple leak points, not just the one that showed up first.
Kitchen Tile Leak in Keys Gate
A homeowner noticed a warm spot on the kitchen tile and a water bill that jumped by 3,000 gallons. The subfloor under the tile was saturated, and the baseboards had started to swell. The leak had been running for at least three weeks.
We located the leak with a thermal camera in 75 minutes, extracted the standing water, and dried the subfloor for three days. The plumber repaired the pipe through a small opening, and we replaced 40 square feet of tile and 12 feet of baseboard.
Maintenance & Follow-up
Check the water bill monthly for jumps over 2,000 gallons, and feel for warm spots on tile after the hot water has been running. Early detection keeps the repair small.
A 1955 block home had water wicking up through the hallway floor. The copper piping under the slab had failed at a joint, and moisture had spread into two bedrooms. The drywall was soft up to 14 inches from the floor.
We removed the saturated drywall and baseboards, dried the framing for four days, and treated the area with an antimicrobial. After the plumber repaired the joint, we replaced the drywall with mold-resistant board and matched the baseboards.
Maintenance & Follow-up
Keep indoor humidity under 60 percent with the AC running, and watch for musty odors near baseboards. A moisture meter check once a year catches slow leaks early.
A property manager found water wicking up through vinyl plank in a rental unit. The tenant had reported a musty smell for two weeks. The slab was wet across 200 square feet, and mold had started on the baseboard paper.
We removed the affected plank and baseboards, HEPA vacuumed the area, and treated the framing. Drying took four days with daily readings. The unit passed a final moisture check, and the carrier approved the full scope from our Xactimate estimate.
Maintenance & Follow-up
Ask tenants to report musty smells or warm floors immediately. A yearly moisture check on ground-floor units catches slab leaks before they reach the drywall.
What Slab Leak Water Damage Restoration Costs
Typical 2026 pricing in Homestead runs $1,800 to $6,500 for a full slab leak restoration, with detection alone at $250 to $500. The biggest cost drivers are how far the water traveled, how much flooring and drywall has to be replaced, and whether mold is present. We give you a written estimate before work starts, and we build it in Xactimate so your insurance claim matches the scope. If you need affordable slab leak repair Homestead without cutting corners on drying, this is how we keep the numbers honest.
Pricing Factors
Size of the wet zone
A leak that stays under one room may need 50 square feet of flooring replaced. One that travels down a hallway can affect 200 square feet or more, which raises material and labor costs.
Flooring type
Tile can often be dried in place and reused. Hardwood usually cups and needs sanding or replacement. Vinyl plank is often removed and replaced because moisture gets trapped underneath.
Mold presence
If mold has started, we add remediation: material removal, HEPA vacuuming, and antimicrobial treatment. That typically adds $800 to $2,500 depending on the area affected.
Pipe repair access
A leak near the slab edge needs a small opening. One in the middle of a room may require more concrete removal and a larger patch, which adds labor and material cost.
Drying duration
Most jobs dry in three to four days. If the water table is high or the leak ran for weeks, drying can take six days or more, which adds equipment rental and monitoring time.
Insurance coverage
Most Florida policies cover the resulting water damage but not the pipe repair. We document both clearly so your carrier can separate the covered and uncovered portions of the claim.
Investment Range
$1,800 - $6,500 depending on scope
Based on project scope
Value You Get
The cost of waiting is higher. A small slab leak that is dried in three days is a flooring repair. The same leak left for a month becomes mold remediation, drywall replacement, and a much larger insurance claim.
How much does slab leak water damage restoration cost in Homestead FL?
Most residential jobs run $1,800 to $6,500 in 2026, depending on how far the water traveled and how much flooring, drywall, and insulation has to be replaced. Detection alone is usually $250 to $500. If the pipe repair is handled by a plumber, that is a separate line item. We give you a written estimate before work starts, and we build it in Xactimate so your insurance claim matches the scope.
Who offers slab leak repair near me in Homestead?
We do, along with the drying and restoration that follows. ClearWave Restoration handles detection, water extraction, structural drying, and material replacement under one crew. For the pipe repair itself, we coordinate with a licensed plumber so the fix happens in the right sequence. Call (645) 654-0721 and we will tell you within a few minutes whether your situation sounds like a slab leak.
How do I know if I have a slab leak in Homestead?
The four most common signs are a warm spot on the floor, the sound of running water when nothing is on, a water bill that jumped by 2,000 gallons or more, and unexplained moisture or buckling in flooring. In Homestead, slab leaks often show up first as a hot spot on tile because the escaping hot water warms the slab. If you see any of these, call us before the damage spreads.
Does insurance cover slab leak water damage in Homestead?
Most Florida homeowners policies cover the water damage that results from a sudden slab leak, but not the pipe repair itself. That means drying, flooring, drywall, and mold remediation are often covered, while the plumber's repair may be out of pocket. We document the cause and the damage in Xactimate so your adjuster can separate the two clearly. Coverage depends on your policy, so confirm with your carrier.
Licensed, Certified, and Local
Certifications
Reviews
ClearWave found our slab leak in about an hour with a thermal camera and showed us the readings on screen. They dried the subfloor for three days and replaced the baseboards. The insurance claim went through without a single question because the documentation was that thorough.
Our 1950s house had copper piping that finally gave out under the slab. ClearWave pulled the water, set air movers, and logged readings every day. They coordinated with our plumber so the pipe was fixed before they closed everything up. Four days of drying, no mold, and the hardwood floor was saved.
A tenant reported water wicking up through the vinyl plank in one of our units. ClearWave handled detection, extraction, and drying in under a week, and their Xactimate estimate matched what the carrier approved. They also flagged a second slow leak we would have missed.
Related Services
Water Damage Cleanup
Once we confirm a slab leak, water damage cleanup removes the standing water and contaminated materials before drying starts. In Homestead, we often find water has wicked into baseboards and drywall by the time the leak is found.
Water Damage CleanupEmergency Water Removal
Active slab leaks can release hundreds of gallons into the slab. Our emergency water removal crews pull that water with extraction units and start drying the same day, which limits how far moisture travels.
Emergency Water RemovalFlood Damage Restoration
When a slab leak combines with heavy South Dade rain, flood damage restoration covers the wider scope: saturated subfloor, wet insulation, and exterior grading issues that keep water against the foundation.
Flood Damage RestorationWater Extraction
Water extraction is the first physical step after detection. We use truck-mount and portable extraction units to pull water from under tile, hardwood, and carpet before air movers and dehumidifiers go in.
Water ExtractionStructural Drying
Structural drying is where most slab leak jobs are won or lost. We set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers, then log daily hygrometer readings until the subfloor and framing hit dry standard.
Structural DryingWater Damage Mitigation
Mitigation stops the damage from getting worse. For a slab leak, that means controlling the source, limiting moisture spread, and setting up containment so mold does not take hold in adjacent rooms while drying is underway.
Water Damage MitigationWater Damage Inspection
A water damage inspection uses a thermal imaging camera, moisture meter, and boroscope camera to confirm the leak location and map the wet zone. We do this before any demolition, so the repair stays small.
Water Damage InspectionResidential Water Damage Restoration
Most Homestead slab leaks happen in single-family homes. Our residential restoration crews handle flooring, drywall, baseboards, and insulation replacement, and we work around your family's schedule.
Residential Water Damage RestorationCommercial Water Damage Restoration
Slab leaks in Homestead storefronts and offices along Krome Avenue Corridor can shut down business. We work after hours, document the loss for your carrier, and restore the space so you can reopen.
Commercial Water Damage RestorationStorm Damage Water Cleanup
South Dade storms push water against foundations and can worsen an existing slab leak. Storm damage water cleanup addresses the combined intrusion and restores the affected materials.
Storm Damage Water CleanupHurricane Water Damage Restoration
Hurricane season in Homestead runs June through November. If a storm drives water into a home with an existing slab leak, we handle both the storm intrusion and the under-slab moisture in one scope.
Hurricane Water Damage RestorationBurst Pipe Water Damage Restoration
A burst pipe under a slab releases water fast. We extract, dry, and document the loss, then coordinate with a licensed plumber for the pipe repair so the restoration is not undone.
Burst Pipe Water Damage RestorationPlumbing Leak Water Damage Restoration
Plumbing leaks above and below the slab both cause hidden moisture. We trace the source with thermal imaging, dry the structure, and restore damaged drywall, flooring, and insulation.
Plumbing Leak Water Damage RestorationRoof Leak Water Damage Restoration
Roof leaks and slab leaks can both show up as ceiling stains or buckled flooring. We inspect both possibilities so the wrong repair is not made, then dry and restore the affected areas.
Roof Leak Water Damage RestorationCeiling Water Damage Restoration
When a slab leak travels upward through walls, ceiling tiles and drywall can sag. We remove saturated materials, dry the framing, and replace ceiling tiles and drywall to match.
Ceiling Water Damage RestorationAppliance Leak Water Damage Restoration
Appliance leaks and slab leaks sometimes get confused because both cause warm floors and high water bills. We rule out the water heater, washing machine, and dishwasher before opening the slab.
Appliance Leak Water Damage RestorationWater Heater Leak Cleanup
A failing water heater can mimic a slab leak. We check the tank, T&P valve, and supply lines first, then move to under-slab detection if the source is not found.
Water Heater Leak CleanupWashing Machine Leak Cleanup
Supply line failures behind a washing machine can send water under vinyl and tile. We extract, dry, and check whether the moisture has reached the slab or stayed in the wall cavity.
Washing Machine Leak CleanupDishwasher Leak Water Damage Restoration
Dishwasher leaks often pool under kitchen cabinets and can travel along the slab. We pull the water, dry the cabinet base and subfloor, and check for under-slab spread.
Dishwasher Leak Water Damage RestorationAC Leak Water Damage Restoration
AC condensate leaks in Homestead's humidity can wet the same subfloor a slab leak affects. We separate the two sources so the right repair is made and the drying scope is accurate.
AC Leak Water Damage RestorationToilet Overflow Cleanup
Toilet overflows introduce contaminated water that needs more than drying. We remove affected materials, treat the area, and check whether water reached the slab.
Toilet Overflow CleanupSewage Backup Cleanup
Sewage backups are category 3 water and require removal of porous materials. If the backup also involves a slab leak, we handle both the contamination and the under-slab moisture.
Sewage Backup CleanupBasement Water Damage Restoration
Homestead homes rarely have full basements, but sunken living areas and garages can collect water from a slab leak. We extract, dry, and restore those lower areas.
Basement Water Damage RestorationCrawl Space Water Damage Restoration
In homes with a crawl space, slab leak water can drain into the void and keep humidity high. We dry the crawl space, treat for mold, and restore the vapor barrier.
Crawl Space Water Damage RestorationHardwood Floor Water Damage Restoration
Hardwood flooring cups and buckles fast when a slab leak wets the subfloor. We dry from below when possible, then sand and refinish or replace boards that cannot be saved.
Hardwood Floor Water Damage RestorationDrywall Water Damage Restoration
Drywall wicks water upward from a wet slab and can hold moisture for weeks. We cut out saturated sections, dry the framing, and replace with mold-resistant drywall where it helps.
Drywall Water Damage RestorationMold Remediation
Mold can start within 24 to 48 hours of a slab leak. Our IICRC AMRT technicians remove affected materials, HEPA vacuum the area, and treat with an antimicrobial under a Florida Mold-Related Services License.
Mold RemediationMoisture Detection Services
Moisture detection is the first step in any slab leak job. We use a thermal imaging camera, moisture meter, infrared thermometer, and boroscope camera to find the leak and map the wet zone.
Moisture Detection ServicesWater Damage Insurance Claim Documentation
We photograph the leak, log daily moisture readings, and build the estimate in Xactimate. That package is what your adjuster needs to process a slab leak claim without repeated site visits.
Water Damage Insurance Claim DocumentationWhat Homestead Homeowners Say
Real experiences from customers who chose our Slab Leak Water Damage Restoration services
"We noticed a warm spot on the kitchen tile and our water bill jumped by 3,000 gallons. ClearWave found the leak with a thermal camera in about an hour and showed us the readings on screen. They dried the subfloor for three days and replaced the baseboards. The insurance claim went through without a single question because the documentation was that thorough."
Maria G.
Homeowner, Keys Gate
"Our 1950s house had copper piping that finally gave out under the slab. ClearWave pulled the water, set air movers, and logged readings every day. They coordinated with our plumber so the pipe was fixed before they closed everything up. Four days of drying, no mold, and the hardwood floor was saved. Fair price and no surprises."
Darnell W.
Homeowner, Homestead Historic Downtown
"A tenant reported water wicking up through the vinyl plank in one of our units. ClearWave handled detection, extraction, and drying in under a week, and their Xactimate estimate matched what the carrier approved. They also flagged a second slow leak in the same slab that we would have missed. That saved us a much bigger repair down the road."
Priya R.
Property Manager, Waterstone
Call Now for Slab Leak Water Damage Restoration in Homestead
Every hour a slab leak runs, more flooring, drywall, and insulation is ruined. We answer 24/7, dispatch from Homestead, and give you a written estimate before work starts. Call (645) 654-0721 and we will tell you what we are seeing and what it takes to fix it.